Search Products
Products
RM Series Modular Online UPS 25-600kVA (380V/400V/415V)
The RM series modular UPS provides the most compact footprint of less than 2㎡ with maximum capacity of 900kVA . With best reliability and high performance, it has been leading the domestic market for years. RM series is considered to be the best power protection solution for large data centers, as well as for sensitive electronics.

Friendly Interface
10.4” LCD Touch Screen Display Provides graphical and text based information of alarms, status data, instructions that  users can have more friendly and safer operation

Isolated Air Flow
The hot-swappable power modules take unique structure design. In the design, PCB boards and heat-sinkers are in two completely different layers, cooling air flows in the lower layer, while keeping the upper PCBs free of dust, which allows the  UPS run in dusty environments, significantly improving its stability and environmental adaptability.  
Unique design for high reliability
Modular IGBT and SCR design, one modular IGBT or SCR equals many discrete IGBT and SCR components, bringing in extremely high reliability.
All components in one module, less fault points, higher reliability
All components integrated as one modular design, smaller disparity
Less space needed, UPS with compact design and higher power design
Integrated inner thermal sensor, can display the inner temperature directly

High Density ,Modular, scalable
High power density, footprint for 300kVA is 0.66m², power density 409KW/m2, saving valuable data center space
Scalable from 30kVA to 900kVA(27kW to 810kW) , max 30 power modules in parallel
Inherently N+X redundant
Hot swappable power module and bypass & monitoring module
Additional charging module, extra charging current 50A*N for long time back up application

Critical Waveform Recording
UPS can record and save the data of the main parameters automatically when faults happen and can be used for further analysis
Can record data information and present as waveform for further analysis
Can easily spot the causes of the failures, avoid future similar faults

Smart Sleep
Smart Sleep function can intelligently make some power modules go to sleep, when load is relatively low, improving the total system efficiency and saving customers on power and cooling costs.
Improving efficiency ,reducing power and cooling costs
Easy setting with just two steps. Customer can sleep mode and rotation period
Power modules working in rotation, prolong the life time

Self-aging
Self-aging is an advanced function applied in all three phase UPS, Self-aging function can test UPS under different load situation without real load, saving more than 90% of energy.
Simulate different load conditions without connecting to any real load, saving 90% of energy
Available in both single and dual inputs connection
On site setting supported, easy for factory testing

Programmable Dry Contacts
Programmable dry contacts are available in all RM and HT33X series UPS. Customers can easily expand or modify the definition of each pin.
Abundant options with three inputs and four output, all programmable
Easy setting, just pull the -down menu and set
Compatible with all the RM and HT33X

MODEL

RM600/30X

RM300/30X

RM180/30X

RM500/25X

RM250/25X

RM150/25X

Capacity

600kVA
/540kW

300kVA
/270kW

180kVA
/162kW

500kVA
/500kW

250kVA
/250kW

150kVA
/150kW

Power module

PM30X(30kVA/27kW)

PM25X(25kVA/25kW)

INPUT

Phase

3 Phase + Neutral + Ground,400V/415V(line to line)

Voltage range

304-478Vac (line-line),full load;
228V-304Vac (Line-Line),load decrease linearly according to the min phase voltage

Frequency range

40Hz-70Hz

Power Factor

>0.99

THDi

THDi<3% @ 100% linear load

OUTPUT

Voltage

380V/400V/415V

Voltage Regulation

1.5%

Power factor

0.9

1.0

THDu

THD<1%(linear load ),THD<5.5%(None-linear load)

Crest Factor

3:1

Overload Capability

110% for 1 hour; 125% for 10 minutes ;150% for1 minute; >150% for 200ms

BATTERY

Voltage

±240VDC

Charge Power
Precision

±1%

Charge Power

20%*System Power

SYSTEM

System Efficiency

Normal mode:95% ;ECO mode:99% ;Battery mode:95%

Display

10.4” color touch screen LCD + LED + Keyboard

IP Class

IP20

Interface

Standard :RS232,RS485,Dry contacts, USB;
Optional: SNMP ,Expansion dry contact card

Operation/
Storage Temperature

0-40℃/-40-70℃

Relative Humidity

0-95%(non-condensing)

Noise

72dB @ 100% load,
68dB @ 45% load
(1 meter away)

65dB @ 100% load,
62dB @ 45% load
(1 meter away)

72dB @ 100% load,
68dB @ 45% load
(1 meter away)

65dB @ 100% load,
62dB @ 45% load
(1 meter away)

PHYSICAL

Weight

Cabinet

660kg

220kg

165kg

660kg

220kg

165kg

Power Module

PM30X:34kg

PM25X:32kg

Dimension
(W*D*H)

Cabinet

2000*1050
*2000(mm)

600*1100
*2000(mm)

600*1100
*1600(mm)

2000*1050
*2000(mm)

600*1100*
2000(mm)

600*1100
*1600(mm)

Power Module

PM30X/ PM25X:460*790*134(mm)
460*790*134